Academy Dashboard › Forum › Production › Digital Recording › Input signal discrepancy

Tagged: 

  • This topic has 1 reply, 2 voices, and was last updated 1 year ago by Chestnut Mtn. Records.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 7, 2020 at 3:45 pm #84770
    Gregg Romano
    Participant

      Hi All,

      I'm hoping someone can clear up an audio input signal discrepancy. I use a Yamaha MG10XU usb mixer as my interface. The meter on the mixer reads -6 dB going into my iMac via usb. In logic pro x, the same audio signal reads -23.4 dB pre-fader metering. Does anyone know why, and how do I correct the audio signal issue?

      • This topic was modified 2 years ago by Gregg Romano.
      March 22, 2022 at 7:13 am #100125
      Chestnut Mtn. Records
      Participant

        Hmmm         I'm really not sure friend, I use a PreSonus studio live 64s mixer   and I had a problem like this also, I found out my mixer sends the signal before fader, so You might try Turning gain, post, pre faders and see which make the change in your computer? every mixer is different.      also, I would try a different usb cord.   Just the stupidest little thing can mess you up!      Best to you

        From CMS

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.